トラストパイロットのレビュー
評価結果 #TOTAL_SCORE# (右記)に基づき5点満点で #TOTAL_NUMBER# レビュー
What's in the box:
- RedNet A16R MkII
- 2x IEC AC mains cables
- 2x IEC Retaining Clips
- Focusrite Pro Important Information Guide provides links to:
- RedNet Control
- RedNet PCIe drivers (included with RedNet Control download)
- Audinate Dante Controller (installed with RedNet Control)
System Requirements:
- Mac OS X:
- 10.15 macOS Catalina
- 10.16 macOS Big Sur
- Windows:
Feature Specifications:
Input / Output Trim
- Input Trim: -78 to 0dB in 1dB steps
(per channel)
-
Output Trim: -78 to 0dB in 1dB steps (per
channel)
Input Sample Rate Convertors
- Sample Rate Range: 32 to 216 kHz
-
Gain Error: -0.3dB
-
Dynamic Range: > 138dB (-60 dBFS
method)
-
THD + N: < -130dB (0.00003%); 0
dBFS input
-
Latency: 11 to 45 samples (network and input
sample rate dependent
Line Inputs
All measurements taken at +24dBu reference level, Rs = 50Ω
- 0dBFS Reference Levels: +18 or +24dBu (switchable)
- Frequency Response: 20h – 20kHz ± 0.1dB
- THD + N: <-105dB (0.0005623%) unweighted, 20Hz – 20kHz; -1dBFS input
- EIN: -95dBu 'A'-Weighted (typical)
- Signal-to-Noise Ratio: 119dB 'A'-Weighted (typical)
- Converter Dynamic Range: 120dB 'A'-Weighted (typical), 10Hz – 20kHz
Line Outputs
All measurements taken at +24dBu reference level, RL = 100kΩ
- 0 dBFS Reference Levels: +18 or +24dBu (switchable)
-
Frequency Response: 20Hz – 20kHz ± 0.1dB
-
THD + N: <-100dB (0.001%) unweighted, 20Hz – 20kHz; +23dBu input
-
Noise in Presence of Signal: -94dBu 'A'-Weighted (typical)
-
Dynamic Range: 118dB 'A'-Weighted (typical)
- Converter Dynamic Range: 120dB 'A'-Weighted (typical), 10Hz – 20kHz
Crosstalk
- Input to Output or Input : <-100dB unweighted, 20Hz – 20kHz; +23dBu input
- Output to Input or Output: <-100dB unweighted, 20Hz – 20kHz; -1dBFS input
Digital Input Sample Rate Converters
- Sample Rate Range: 32kHz to 216kHz
- Gain Error: -0.3dB
- Dynamic Range: >138dB
- THD + N: <-130dB (0.00003%)
- Latency : 11 to 45 samples (network and sample rate dependent)
Digital Performance
- Supported Sample Rates: 44.1 / 48 /
88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
-
Clock Sources: Internal,
Word Clock, DARS or from Dante Network Master
-
External Word Clock Range: Nominal
sample rate ±7.5%
Rear Panel Connectivity
Analogue Inputs
- Line Inputs: 2 x DB-25 connectors
Analogue Outputs
- Line
Outputs: 2 x DB-25 connectors
AES3
- Channel Count: 2 x 2 AES3 channels
-
Input (optional DARS): 1 x Female
XLR (Switchable with analogue input channels 15 and 16 at quad rates)
-
Output: 1 x Male XLR (Duplicate of analogue
output channels 15 and 16 at quad rates
Word Clock
- Word Clock Input: 1 x BNC 75Ω port (Switchable Termination)
- Word Clock Output: 1 x BNC 75Ω port
PSU & Network Connections
- PSU: 2 x IEC Inputs with retaining
clips.
-
Network: 2 x etherCON NE8FBH-S, also compatible
with standard RJ45 connectors (Accommodates rugged etherCON NE8MC*. Does not
intermate with Cat 6 cable connector NE8MC6-MO and NKE65* cable)
Front Panel Indicators
- Primary PSU (A): Green LED.
Illuminates when an AC input is applied and all DC outputs are present.
-
Secondary PSU (B): Green LED.
Illuminates when an AC input is applied and all DC outputs are present.
-
Primary Network: Green LED.
Indicates that a network connection is present on primary port when in
redundant mode. When in Switched mode, a valid network connection at either
Primary or Secondary network port will cause this LED to illuminate.
-
Secondary Network: Green LED.
Indicates that a network connection is present on secondary port when in
redundant mode. Not used in switched mode.
-
Network Locked: Green LED. When
unit is network slave, shows valid network lock. When unit is network master,
shows lock to internal clock.
-
Sample Rate: Orange LED for each:
44.1 kHz, 48 kHz, x2, x4.
-
Pull Up/Down: Orange LED. Indicates
that the unit is set to operate on a Dante pull up/down domain.
-
Channel Signal Level: 16 Input and
16 Output tri-state signal level LEDs: Green LED (> -42dB), Orange LED (>
-6dB) and Red (> 0dB)
-
AES3 signal indicators: 2 I/O
signal indicator LEDs (one input, one output). Green LED illuminates
>-127dBFS
-
Clock Source: Orange LED for each: Internal,
Word Clock and DARS
Network Modes
- Redundant: Allows unit to connect
to two independent networks.
-
Switched: Connects both ports to
integrated network switch allowing daisy-chaining of devices.
Power
- PSU: 2 x Internal, 100-240V, 50/60Hz, consumption 30W
Heat Performance
- Operating Temperature: Operates at up to an ambient temperature of 50 degrees Celcius
- Fan: Two-step Dual Fans which
increase in speed when reaching temperatures towards 50 degrees ambient
temperature
Product Dimensions:
- 482mm (18.98") width x 327mm (12.87") depth x 44mm (1.73") height
- Weight: 4.995kg
,